当前位置:首页 > 技术案例
新能源汽车绝缘安装底座案例

jueyuanaz1.jpg

2.jpg

—— INTRODUCTION ——

引言

○

●

橙色是功能色,不是装饰色。国标强制要求B级电压电缆/线束外皮用橙色区分,外壳移开后可见高压警告标记。连接器壳体做成RAL 2003 信号橙是行业与新能源车企规范的延伸,且要求颜色在热老化、耐候后仍可识别。

耐高温电路内部绝缘安装基座主要用于配电设备中,用来固定内部的电路模块、接线端子等元器件,同时实现电气隔离,避免带电部件与金属外壳导通,保障用电安全。

jueyuanaz3.jpg


Orange is a functional color, not a decorative one. National standards mandate that Class B voltage cables and harness sheaths be identified in orange, with high-voltage warning labels that must remain visible once covers are removed. The use of RAL 2003 (Signal Orange) for connector housings extends the color conventions established by industry standards and NEV(New Energy Vehicle) manufacturer specifications - and the color must remain identifiable even after thermal aging and weathering.

This high-temperature internal insulation mounting base is mainly used in power distribution equipment to secure internal circuit modules, terminals, and other components while providing electrical isolation. It prevents live parts from making contact with the metal enclosure, ensuring electrical safety.


2.jpg

基本信息


产品名称:绝缘安装底座
材料:PBT-30%GF橙色
模穴:1模1穴
产品尺寸:101*469*84mm
成型周期:55~60s


2.jpg

BASIC INFORMATION


Product Name: Insulated Mounting Base
Material: Orange PBT + 30% GF
Cavity Layout: 1 mold x 1 cavity
Product Dimensions: 101*469*84mm
Cycle Time: 55~60s


—— SOLUTIONS ——

热流道系统方案

○

●


2.jpg

jueyuanaz7.jpg

V/P转换时的射压

INJECTION PRESSURE AT V/P CONVERSION


jueyuanaz8.jpg

波前温度分布

TEMP. AT FLOW FRONT


jueyuanaz9.jpg

平均体积收缩率

AVERAGE VOLUMETRIC SHRINKAGE RATE


jueyuanaz10.jpg

总体变形

TOTAL DEFORMATION


3点半整体针阀系统

Hot Runner System: 3-Drop Valve Gate Semi-Assembly System.


—— CHARACTERISTICS ——

热流道系统特点

○

●

jueyuanaz11.jpg


主流材料无卤阻燃 PA66-25/30%GF。橙红配色对色母选择非常重要,普通偶氮橙约 180℃ 开始分解变色,无法满足PA66材料260~290℃的加工温度,要用 DPP(PO73、PR254/255)、苝系(PR149/PR179)、异吲哚啉酮黄(PY109/110)或耐温 ≥320℃ 的高性能染料 。

痛点:浇口黑点、黑纹等产品异色问题 。原因分析:阻燃剂活化温度和加工温度高度重叠,工艺窗口常常只有 10~15℃,超温或熔体在流道内滞留时间过长都容易碳化,造成浇口异色。

解决方案:①温控精准:贴片式加热器,温度更均匀。②流道容积 ≤ 单次注射量,理想是一个注射周期内把流道里的熔体全部更新。③合理的结构设计和工艺:流道孔光滑无滞料。

The mainstream material for this application is halogen-free flame-retardant PA66 with 25–30% GF. For orange-red coloring, masterbatch selection is critical: Conventional azo orange pigments begin to decompose and discolor at around 180 °C and cannot withstand the 260–290 °C processing temperature of PA66. High-performance colorants with heat stability of 320 °C or above are required, such as DPP pigments (PO73, PR254/255), perylene pigments (PR149/PR179), or isoindolinone yellows (PY109/110).

Pain point: Discoloration defects such as black spots and black streaks at the gate. Root cause: The activation temperature of the flame retardant overlaps closely with the processing temperature, often leaving a process window of only 10–15 °C. Any temperature overshoot, or prolonged melt residence time in the runner, easily causes carbonization — resulting in gate discoloration.

Solutions: ①Precise temperature control: Patch-type heaters deliver more uniform heating. ②Runner volume ≤ single shot volume: Ideally, the entire melt in the runner is renewed within one injection cycle. ③Sound design and processing: Smooth runner channels with no hold-up zones.


—— TECHNOLOGY ——

技术要求

○

●


jueyuanaz12.png


钢球挤压技术:提高流道光洁度及硬度。

Steel Ball Extrusion Technology: Enhances runner surface finish and hardness.


jueyuanaz13.jpg


贴片式加热器:高效传热,温度更平衡。

Patch-type Heater: Efficient heat transfer for a more balanced temperature profile.


jueyuanaz14.jpg


特殊热嘴结构:TIP两次封胶,减少头部滞料,预防黑点。

Special TIP Structure: TIP with two-stage sealing reduces melt hold-up at the tip head, preventing black spots.



HTS热流道

为合作伙伴提供整套热流道技术解决方案。

好特斯·塑造美好!

HTS Hot Runner

provides our partners with complete sets of

hot runner technical solution.

HTS MOULD BEAUTY!

2.jpg